Osiris

italic Italy
Please follow us
 
Osiris 10 Osiris 10 Osiris 10 Osiris 10 Osiris 10
Model Osiris 10
Rated Capacity 10 kW
Start-up Wind Speed 2.5 m/s
Rated Wind Speed 9.5 m/s
Survival Wind Speed 50 m/s
Generator Direct drive permanent magnet(NdFeB) generator
Weight 850 kGs
Rotor Diameter 9.7 m
Number of Blades 3
Blade Material Carbon fibre composite
Rotor Orientation Type Downwind
Direction of Rotation Counterclockwise looking upwind
Rated Rotation Speed 120 RPM
Protection System in Hihg Wind Speed Passive pitch,active pitch and electrical brake
Grid Tie Type Programmable 220/240 VAC 50-60HZ(single phase)
Programmable 380/400 VAC 50-60HZ(three phase)
Small wind Big technologies
Osiris Three pitch control mechanisms included
Osiris unique pitch mechanism secures the safety of the turbine at extremely high wind condition with the speed over 50m/s. The failure to safe pitch system combines with three levels' pitch mechanims including passive pitch, active pitch with battery bakcup and manual pitch.
Osiris
Osiris Carbon fiber composite reinforced blades
Carbone fiber composite reinforced blade made with 5 tons' aluminmum RTM moulds ensures its strength(can withstand more than 30,000 NM for Osiris 10), production performance, rotation balance and lifetime.
Osiris
Osiris Low rated RPM direct drive PM generator
Ultra low rated RPM (120 for Osiris 10) direct drive permanent magnet generators give the features of low noise, low vibration, low start-up wind speed, high efficiency and high production to Osiri turbines.
Osiris
Osiris Optimal tip speed control through the whole working wind speed range
Hydraulic tower system allows the installers to install the Osiris turbines safely, easily and economically. It also allows the installers to avoid dangerous climbing of the tower and perform the maintenance on the ground when needed.
Osiris
Osiris Large blade diameter/swept area for low and medium wind speed area
9.7 meters blade dieamer brings Osiris 10 74 square meters' swept area and gurantee it to become one of the best power production machine in its class even at low wind speed.
Osiris
Osiris Real time monitoring of the turbine and environment status
Osiris monitoring system includes both turbine status&safety monitoring and power production monitoring. It can automcatially shut down the turbine when the major parts of the turbine are faulty or the wind speed is over a certain pre-set value. It can also monitor and keep the power production performance at the web server which the clients can check at any corner of the world.
Osiris
Third party independent testing
IEC 61400-2 is the world standard for small wind turbine system with the square meters less than 200 square meters. Some countries may have their own standard based on IEC 61400-2 standard (e.g. AWEA(USA), BWEA(UK), ClassNK(Japan)). The main testing includes duration, power performance, safety and function, acoustic noise emissions, and power quality (where applicable). Osiris 10 is one of the very few small wind turbines in the world fully tested by the world famous lab Intertek based on the international standard of IEC 61400-2, American standard of AWEA 9.1 and Japanese standard of Class NK. UK MCS testing and certificate was also done by our UK partner.

With these testing and certificate, not only the third party performance independent testing data is available, but the reliabity/duralibity testing was also completed.

Power Curve
Energy Produced

Certifications:
IEC 61400-2 AWEA 9.1 CE
IEC 61400-2 AWEA 9.1 CE
Real (over 2000) installations in 30 countries
Asia
China Japan Korea Taiwan
Thailand Turkey Vietnam Mongolia
Laos India Indonesia  
Oceania
Australia New Zealand    
Europe
Finland Sweden Denmark Germany
Austria Netherlands Belgium France
Spain Italy Switzerland Romania
Hungray Slovkia Poland Slovenia
Czech Malta Ireland Portugal
Greece Russia Israel UK
North America
Canada USA Mexico  
Central and South America
Costa Rica Brazil Chile Argentina
During last 7 years, over 2,000 of Osiris 1.6 and Osiris 10 systems were installed in over 30 countries in Asia, Australia, Europe, North America and Central/South America. Osiris turbines have been installed for almost all areas including residential houses, farms, telecommunication, business/retail buildings, government buildings, schools, etc. Please feel free to check the installation photos and case studies at our website.
Local service local warranty
We always believe that we need to provide the local service and local warranty with our over 100 dealers network in 44 countries. We have the distributors and dealers in following areas, please contact sales@osirisenergy.com for the contact information of local dealers.
map Canada USA Mexico Chile Argentina Ireland UK Sweden New Zealand Australia Indonesia Thailand Vietnam Laos Taiwan China Korea India Japan Finland Russia Portugal Mongolia Denmark Holland Poland Brasil Germany Belgium Czech Spain France Austria Israel Greece Switzerland Romania Turkey Italy Slovakia Slovenia